YWFΦ630 Blowing Axial Cooling Flow Fan

The YWFΦ630 blowing axial cooling flow fan has a wide range of uses, which is mainly composed of the fan impeller and the housing. It can be said that it is a simple structure and high efficiency equipment. The work flow of the blowing axial cooling flow fan is as follows: when the impeller is rotating, the gas enters the impeller axially from the intake vent. At this time,because the blade on the impeller is pushed, the energy of the gas will increase, and then flow into the guide vane. The guide vane will convert the deflected air into axial activity and introduce the gas into the diffuser tube, so that the kinetic energy of the gas can be converted into pressure energy. The pressure can be introduced into the working line, and the blade can be rotated longitudinally after being fixed in the direction. The angle and spacing of the blades can be changed is a very important advantage of the blowing axial cooling flow fan, when the angle of the blades is relatively low, the flow will become smaller, and the spacing increases, the flow can become larger. There are many types and models of blowing axial cooling flow fan, different places of use, the type of fan needed to be used is not the same, and users need to select according to the conditions of the use occasion. In addition, different space conditions and ventilation, the functional requirements of the blowing axial cooling flow fan are not the same, and only the correct selection can ensure smooth use in the future.